+46 8 446 37 20info@aceoptions.se

Hem      |     Logistik      |     Köpvillkor      |     Retur & Garanti      |     Garanterat ACE      |     Support      |     Tjänster      |     Kontakt
Sök
 
 

Catalyst 6500

Du måste logga in för att kunna handla/se priser.
Cat6500 48-Port PoE 802.3af & ePoE 10/ 100/ 1000 w/Jumbo Frame

CISCO Cat6500 48-Port PoE 802.3af & ePoE 10/ 100/ 1000 w/Jumbo Frame (WS-X6148A-GE-45AF=)


SKU: WS-X6148A-GE-45AF=
Org. Artikel#: WS-X6148A-GE-45AF=
Produkt: Modul
Portar: 48
Hastighet: 1Gbps
Inte på lager
HYRA (ex moms)
12-mån 
3.747,-/månader
24-mån 
1.922,-/månader
36-mån 
1.317,-/månader
Vid HYRA gäller. Uppläggningsavgift 350,- , administrationsavgift 0,-/månad, minsta order 5.000,- Moms tillkommer. Förutsätter kreditgodkänning. Hyra kan väljas som ett betalningssätt när du kommer till kassan.
Beskrivning

Cisco Catalyst 6500 Series 10/100- & 10/100/1000-MBPS Ethernet Interface Modules

As the premier Cisco® modular multilayer switch, the Cisco Catalyst® 6500 Series delivers secure, converged services from the wiring closet to the core, to the data center, and to the WAN edge.

The Cisco Catalyst 6500 Series provides the broadest selection of 10/100 and 10/100/1000 Ethernet media, Power over Ethernet (PoE) (inline power) options, densities, performance, interoperability, and chassis deployment options. From basic wiring closets and small campus distribution and core layers to high-performance data centers, the Cisco Catalyst 6500 Series 10/100BASE-TX modules scale from 16 ports up to 1152 ports, and the 10/100/1000BASE-TX modules scale from 16 ports up to ports in a single Cisco Catalyst 6500 Series chassis. Cisco Catalyst 6500 Series 10/100 and 10/100/1000 modules offer:
• Proven and widely deployed Cisco AVVID (Architecture for Voice, Video and Integrated Data) wiring-closet solution: These modules are the most widely deployed Cisco IP Telephony port-enabled campus switch.
• Choice of media and connector types: These modules are available in copper unshielded twisted-pair (UTP) and shielded twisted-pair (STP) using RJ-45 or RJ-21.
Note: Refer to the "Cisco Catalyst 6500 Series Mixed-Media Gigabit Ethernet Interface Modules" data sheet for information about modular physical layer deployment options using gigabit interface converters (GBICs) and Small Form-Factor Pluggable (SFP) form factors.
• IEEE 802.3af PoE support (for example, IP phone and wireless access point): These modules support PoE field upgrade, network-interface-card (NIC) and phone auto detection (phone discovery), and voice VLANs.
• Simplified network operation with cable fault detection: These modules offer the ability to test cabling using a time domain reflectometer (TDR), which sends signals down the cable to identify faults in each twisted pair (available on some 10/100 and all 10/100/1000 Ethernet-over-copper interface modules).
• Range of port densities: These modules are available with 16 to 96 ports per module, enabling up to 1152 10/100BASE-TX ports or 576 10/100/1000BASE-TX ports per 13-slot chassis (configured with 12 interface modules).
• Scalable and predictable system performance: These modules provide a selection of switch-fabric connections and throughput options:
• 32-, 256-, and 720-Gbps bandwidth with a system throughput of: 15, 30, 210, and up to 400 Mpps.
• IEEE 802.3 triple-speed autonegotiation: These modules allow switches to negotiate speed (10, 100, and 1000 Mbps) and duplex mode (half or full) with attached devices.
• Superior traffic management: These modules are available with large (up to 1 MB per interface) buffers, and up to 4 transmit queues to aid in congestion avoidance, traffic prioritization, and policing; multiple thresholds can be configured to manage differentiated levels of service.
• Operational consistency: These modules Configurations offer configurations for Cisco Catalyst 6500 Series 3-, 6-, 9-, and 13-slot chassis running Cisco IOS® Software and Cisco Catalyst Operating System Software; they are interoperable with all other interfaces and services modules and forward-compatible with all Cisco Catalyst 6500 Series supervisor engines.
• Maximum network uptime and resiliency: These modules support the Cisco Enhanced Per- VLAN Spanning Tree Plus (PVST+) protocol, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP), IEEE 802.1s Multiple Spanning Tree (MST) protocol, Per-VLAN Rapid Spanning Tree (PVRST) protocol, Hot Standby Router Protocol (HSRP), Virtual Router Redundancy Protocol (VRRP), Cisco EtherChannel® technology, and IEEE 802.3ad link aggregation for fault-tolerant connectivity.
• Extensive management tools: These modules support the CiscoWorks network-management platform; Simple Network Management Protocol (SNMP) Versions 1, 2, and 3; and four Remote Monitoring (RMON) groups (statistics, history, alarms, and events).

IP Telephony and User-Mobility Support with Cisco Catalyst 6500 Series 10/100 and 10/100/1000 Ethernet Interface Modules
The Cisco Catalyst 6500 Series is a lead element in Cisco AVVID, providing numerous IP telephony and network security features for the enterprise.
The Cisco Catalyst 6500 Series delivered the industry's first Ethernet switching modules that provided PoE for converged data and voice traffic as well as other powered devices, such as wireless access points. Several Cisco Catalyst 6500 Series interface modules support PoE on each interface port, allowing customers to build campus multiservice data and voice networks for wiring closets with the following features:
• PoE: Provides power for Cisco Prestandard Inline Power and IEEE 802.3af standard PoE over standard Category 5 UTP cable up to 100 meters for such as IP phones and wireless access points
• Powered Device Discovery: Detects the presence of a powered device such as an IP phone and supplies inline power automatically
• Auxiliary VLAN using 802.1Q: Segments IP phones and data endpoints into separate, logical networks automatically
• Automatic quality of service (AutoQoS): Simplifies the task of configuring QoS mechanisms for IP telephony and more
• Cisco Identity Based Networking Services (IBNS): Enables greater security while simultaneously offering cost-effective management of changes throughout the organization

Cisco Catalyst Prestandard Inline Power and IEEE 802.3AF POE
Using existing Category 5 UTP installations, the PoE feature helps enable network administrators to control power distribution from a central location. Configuring Cisco Catalyst 6500 Series switches with uninterruptible-power-supply (UPS) systems helps ensure that building power outages will not affect network telephony connections, providing greater network availability.
Enabled by a daughter card for "pay-as-you-grow" flexibility, several Cisco Catalyst 6500 Series 10/100 and 10/100/1000 Ethernet interface modules support PoE. Some of these interface modules support the IEEE 802.3af standard as an additional upgrade option. The Cisco Catalyst PoE feature implementation passes the required domestic and international safety regulations and compliance measures.
All Cisco Catalyst 6500 Series 802.3af PoE modules support all three classes of powered devices, delivering a maximum of 15.4W per port as defined in the standard:
• Class 1: Up to 4W per port
• Class 2: Up to 7W per port
• Class 3: Up to 15.4W per port
All 802.3af PoE modules are capable of supporting up to 48 Class 3 devices per module (that is, 15.4W per port for 48 ports simultaneously). The maximum number of powered devices supported in a system for each class depends on the specific system configuration such as chassis type, supervisor engine, and power supply used.

Product Number

Speed

IEEE 802.3af PoE Support

Cisco Prestandard PoE Support

Maximum Power per Port

WS-X6548-GE-45AF

10/100/1000

Yes

Yes

15.4W

WS-X6548V-GE-TX

10/100/1000

Field upgradeable with WS-F6K-GE48-AF= daughter card

Yes

7W; 15.4W with WS-F6K-GE48-AF= daughter card upgrade

WS-X6148A-GE-45AF

10/100/1000

Yes

Yes

15.4W

WS-X6148-GE-45AF

10/100/1000

Yes

Yes

15.4W

WS-X6148V-GE-TX

10/100/1000

Field upgradeable with WS-F6K-GE48-AF= daughter card

Yes

7W; 15.4W with WS-F6K-GE48-AF= daughter card upgrade

WS-X6348-RJ45V

10/100

No

Yes

7W

WS-X6348-RJ21V

10/100

No

Yes

7W

WS-X6196-21AF

10/100

Yes

Yes

15.4W

WS-X6148X2-45AF

10/100

Yes

Yes

15.4W

WS-X6148A-45AF

10/100

Yes

Yes

15.4W

WS-X6148-45AF

10/100

Yes

Yes

15.4W

WS-X6148-RJ45V

10/100

Yes (part number WS-X6148-45AF-UG=) for upgrade

Yes

7W

WS-X6148-21AF

10/100

Yes

Yes

15.4W

WS-X6148-RJ21V

10/100

Yes; Use (part number WS-X6148-21AF-UG=) for upgrade

Yes

7W

Cisco Catalyst 6500 Series 10/100 and 10/100/1000 Modules
Cisco Catalyst 6500 Series 10/100 and 10/100/1000 Ethernet interface modules feature three classes of forwarding architectures and switch-fabric interconnections, classic, Cisco Express Forwarding 256, and Cisco Express Forwarding 720, to provide a choice of speeds and forwarding rates.

Feature

Classic Interface Modules

Cisco Express Forwarding 256 Interface Modules

Cisco Express Forwarding 720 Interface Modules

Performance or Forwarding Rate (Mpps)

32 Gbps; 15 Mpps per system

• 256 Gbps using Cisco Express Forwarding; up to 30 Mpps per system
• Using Distributed Cisco Express Forwarding upgrade: Up to 15 Mpps per slot for slots equipped with distributed forwarding card (DFC) or DFC3 to support distributed forwarding
• 720 Gbps using Cisco Express Forwarding; up to 30 Mpps per system
• Using Distributed Cisco Express Forwarding upgrade, up to 48 Mpps sustained per slot for modules equipped with DFC3 to support distributed forwarding

Forwarding-Engine Architecture

Centralized Cisco Express Forwarding engine located on supervisor policy feature card (PFC) makes forwarding decision

• Centralized Cisco Express Forwarding engine located on supervisor PFC makes forwarding decision
• Upgradable to Distributed Cisco Express Forwarding switching 1 with optional WS-F6K-DFC or WS-F6K-DFC3)
• Centralized Cisco Express Forwarding engine located on supervisor PFC makes forwarding decision
• Upgradable to Distributed Cisco Express Forwarding local switching with optional WS-F6700-DFC3)

Supervisor Engine Supported

• Supervisor Engine 1A
• Supervisor Engine 2
• Supervisor Engine 720
• Supervisor Engine 1A
• Supervisor Engine 2
• Supervisor Engine 720

Supervisor Engine 720

Optional DFC Upgrade Support

Not supported

• Use WS-F6K-DFC) with Supervisor Engine 2 and switch fabric module 2 (SFM2)
• Use WS-F6K-DFC3) with Supervisor Engine 720

Use WS-F6700-DFC3) with Supervisor Engine 720

Fabric Connections

Connection to 32-Gbps shared bus (all supervisors)

Connections through single 8-Gbps channel to switch fabric (Supervisor Engine 720 or Supervisor Engine 2 with SFM) and 32-Gbps shared bus

Dual 20-Gbps (40 Gbps total) channel connection to switch fabric on Supervisor Engine 720

Chassis or Slot Support Requirements

Any slot in any chassis

Any slot in any chassis

Any slot in Cisco Catalyst 6506, Catalyst 6509, Catalyst 6509-NEB-A, and slots 9 through 13 on Cisco Catalyst 6513; Cisco Catalyst 6503 not supported at current time

1The WS-X6548-GE-TX, WS-X6548V-GE-TX, and WS-X6548-GE-45AF modules do not support distributed forwarding; a WS-F6K-DFC and WS-F6K-DFC3A/B/BXL) cannot be installed on these interface modules

Cisco Catalyst 6500 Series Cisco Express Forwarding 720 10-, 100-, And 1000-MBPS Ethernet-over-Copper Modules
Designed for high-performance enterprise and service provider distribution, core layers, data-center, and Web-hosting applications where voice capability is not required, Cisco Express Forwarding 720 twisted-pair interface modules provide line-rate 10/100/1000 Ethernet forwarding with the following operational advantages (refer to Table 3):
• Forwarding architecture: These modules use the central Cisco Express Forwarding engine located on the supervisor engine; optional field-upgradable Distributed Cisco Express Forwarding daughter cards are available.
• Forwarding performance: These modules forward packets up to 30 Mpps per system; they forward packets up to sustained 48 Mpps per slot for slots equipped with distributed forwarding cards (DFC or DFC3).
• Fabric connection: These modules connect to the switch-fabric channels using dual 20 Gbps switch-fabric channels (40 Gbps total).
• Supervisor engine: These modules work with Supervisor Engine 720.
• Distributed forwarding upgrade option: These modules help enable full locally distributed forwarding; they use an optional (part number WS-F6700-DFC3) upgrade to operate with the Supervisor Engine 720, and they provide optimal interface module performance.
• Slot and chassis requirements: These modules can occupy any slot in the Cisco Catalyst 6506, Catalyst 6509, Catalyst 6509-NEB, or Catalyst 6509-NEB-A; they require slots 9 through 13 when used in the Cisco Catalyst 6513. Cisco Catalyst 6503 support is under consideration for the future (refer to release notes for details).
• Maximum port density per chassis: These modules support up to 384 ports per Cisco Catalyst 6509, up to 240 Cisco Express Forwarding-based ports, and an additional 336 classic or Cisco Express Forwarding 256-based ports per Cisco Catalyst 6513.
Note: PoE is not supported on Cisco Express Forwarding 720 10/100/1000 interface modules.

Product Number

Primary Application

Ports, Connector, Maximum Distance, and Cable Type

PoE Support

Maximum Frame Size (jumbo frame) Support

Queues per Port (Tx=Transmit, Rx=Receive) 1

Buffer Size per Port

WS-X6748-GE-TX

Data center and server farm

48, RJ-45, 100m, Category 5 cable

No

Up to 9216 bytes per frame

Tx-1p3q8t; Rx-1q8t (when using Distributed Cisco Express Forwarding)

1.3 MB

Cisco Catalyst 6500 Series Cisco Express Forwarding 256 10/100 and 10/100/1000 Interface Modules
Designed for premier wiring closets, small campus backbone, and server farm applications, Cisco Express Forwarding 256 10/100 and 10/100/1000 Ethernet-over-copper interface modules provide line-rate 10/100 Ethernet forwarding and gigabit bandwidth options. (Refer to Table 4).
The PoE Cisco Express Forwarding 256 10/100/1000 interface modules provide flexible 10-, 100-, and 1000-Mbps access to the desktop through standard RJ-45 connectors. These interface modules feature PoE field-installable daughter cards for pay-as-you-grow investment protection and flexibility. Purposefully designed for the wiring closet with 8:1 oversubscription, these 10/100/1000 interface modules cannot be equipped with distributed forwarding cards.
Offered with a choice of RJ-45 and RJ-21 connectors, the data-only Cisco Express Forwarding 256 10/100 and 16-port 10/100/1000 Ethernet interface modules can be deployed where PoE capability is not required, and they can be equipped with distributed forwarding daughter cards for higher-performance local packet-forwarding environments.
The Cisco Catalyst 6500 Series Cisco Express Forwarding 256 10/100 and 10/100/1000 interface modules offer the following operational advantages and characteristics:
• Forwarding architecture: These modules use the central Cisco Express Forwarding engine located on the supervisor engine.
• Forwarding performance: These modules forward packets up to 30 Mpps per system and up to 15 Mpps per slot if upgraded to support distributed forwarding.
• Fabric connection: These modules connect to the switch fabric through one 8-Gbps connection and the 32-Gbps shared bus.
• Supervisor engine: These modules work with Supervisor Engine 1A, Supervisor Engine 2, or Supervisor Engine 720.
• Slot requirements: These modules can occupy any slot in any Cisco Catalyst 6500 Series chassis.
• Maximum port density per chassis (48-port modules): These modules support up to 576 ports per Cisco Catalyst 6513, and up to 384 ports per Cisco Catalyst 6509.
• Maximum port density per chassis (16-port modules): These modules support up to 192 ports per Cisco Catalyst 6513, and up to 128 ports per Cisco Catalyst 6509.
Exclusive features of the Cisco Express Forwarding 256 10/100 and 16-port Cisco Express Forwarding 256 10/100/1000 Ethernet interface modules follow:
• Distributed forwarding upgrade: An optional upgrade is available to perform distributed forwarding; it requires a WS-F6K-DFC3 upgrade to operate with Supervisor Engine 720; a WS-F6K-DFC upgrade to operate with Supervisor Engine 2 Multilayer Switch Feature Card 2 (MSFC2); and an SFM.
Exclusive characteristics and features of the 48-port Cisco Express Forwarding 256 10/100/1000 Ethernet interface module follow:
• Field-installable and -upgradable PoE daughter cards: Sharing the same Category 5 UTP cabling used for network connections, these daughter cards help enable centralized power distribution to IP phones, wireless access points, and other powered devices.
• These modules are designed to support field upgrades to the IEEE 802.3af PoE standard with a new daughter card providing maximum investment protection.
• TDR: TDR tests cabling by sending signals down the cable to identify faults in each twisted pair.
• Distributed forwarding upgrade: This feature is not supported. The WS-X6548-GE-TX, WS-X6548V-GE-TX, and WS-X6548-GE-45AF do not support distributed forwarding (WS-F6KDFC and WS-F6K-DFC3A).

Product Number

Primary Application

Ports, Connector, Maximum Distance, and Cable Type

PoE Support

Maximum Frame Size (jumbo frame) Support

Queues per Port (Tx= Transmit, Rx = Receive) 1

Buffer Size per Port

WS-X6548-GE-TX

Premier wiring closet

48, RJ-45, 100m, Category 5 cable

Field upgradable to Cisco Prestandard and IEEE 802.3af

Up to 1518 bytes per frame

Tx-1p2q2t (per 8 ports)

Rx-1p2t (per port)

1.4 MB per 8 ports

WS-X6548-GE-45AF

Premier wiring closet

48, RJ-45, 100m, Category 5 cable

Yes (both IEEE 802.3af and Cisco Prestandard)

Up to 1518 bytes per frame

Tx-1p2q2t (per 8 ports)

Rx-1p2t (per port)

1.4 MB per 8 ports

WS-X6548V-GE-TX

Premier wiring closet

48, RJ-45, 100m, Category 5 cable

Yes, only Cisco Prestandard

Up to 1518 bytes per frame

Tx-1p2q2t (per 8 ports)

Rx-1p2t (per port)

1.4 MB per 8 ports

WS-X6516-GE-TX

Data center and server farm

16, RJ-45, 100m, Category 5 cable

No

Up to 9216 bytes per frame

Tx-1p2q2t

Rx-1p1q4t

512 KB

WS-X6548-RJ-45

Server Farm

48, RJ-45, 100m, Category 5 cable

No

Up to 9216 bytes per frame

Tx-1p3q1t

Rx-1p1q

1116KB

WS-X6548-RJ-21

Server Farm

48, RJ-21, 100m, Category 5 cable

No

Up to 8092 bytes per frame

Tx-1p3q1t

Rx-1p1q

1116KB

1Queues legend: 1p3q1t = 1 priority queue, 3 round-robin queues, and 1 threshold

Cisco Catalyst 6500 Series PoE, Classic 10/100, and 10/100/1000 Interface Modules
Designed for deployment in wiring closets, high-density Cisco Catalyst 6500 Series Classic 10/100 and 10/100/1000 interface modules provide line-rate 10/100 Ethernet forwarding and gigabit bandwidth to the desktop capabilities. These interface modules feature PoE field-installable daughter cards for pay-as-you-grow investment protection and flexibility.
The 96 port 10/100 module (part number WS-X6196-21AF) is the industry's first 96-port 10/100 RJ-21 module with IEEE 802.3af support for all 96 ports, helping enable the Cisco Catalyst 6500 Series to deliver the industry's highest port densities ranging from 192 10/100 ports in a Cisco Catalyst 6503 chassis to 1152 10/100 ports in a Cisco Catalyst 6513 chassis for a very cost-effective solution in the wiring closet.
The WS-X6196-RJ-21 module doubles the port density in the system in the same footprint, using the stacked standard RJ-21 connectors. Port-density improvement can be achieved with no incremental investment in the cable infrastructure. With the 802.3af PoE daughter card, this module can support up to 96 Class 2 devices or 62 Class 3 devices per module (960W of PoE per module).
The 96-port 10/100 module (part number WS-X6148X2-RJ-45) is the industry's first 96-port 10/100 RJ-45 module that helps enable the Cisco Catalyst 6500 Series to deliver industry's highest port densities, ranging from 192 10/100 ports in a Cisco Catalyst 6503 chassis to 1152 10/100 ports in a Cisco Catalyst 6513 chassis for a very cost-effective solution in the wiring closet.
The 96-port 10/100 module (part number WS-X6148X2-RJ-45) doubles the port density in the system by allowing it to expand from 48 ports to 96 ports per slot with the addition of a splitter (included), typically mounted at the patch panel. The splitting also can occur at the wall jack, providing another option for doubling the port density of the switch without costly rewiring. This module also can function as a regular 48-port 10/100 module for maximum flexibility and scalability in the future. With the 802.3af PoE daughter card, this module can support up to 48 Class 3 devices per module when operating as a 48-port module, or up to 96 Class 2 devices per module when operating as a 96-port module (960W of PoE per module).
Using RJ-21 or RJ-45 connectors, the Cisco Catalyst 6500 Series classic 10/100 and 10/100/1000 modules are ready to be deployed in virtually all wiring-closet environments (Table 5) with the following operational advantages and characteristics:
• Forwarding architecture: These modules provide centralized Cisco Express Forwarding.
• Forwarding performance: These modules forward packets up to 15 Mpps per system.
• Fabric connection: These modules provide a 32-Gbps shared bus connection.
• Supervisor engine: These modules work with Supervisor Engine 1A, Supervisor Engine 2, Supervisor 32, or Supervisor Engine 720.
• Distributed forwarding upgrade: No upgrade is available; classic interface modules cannot be upgraded for distributed forwarding.
• Slot requirements: These modules can occupy any slot in any Cisco Catalyst 6500 Series chassis.
• Maximum port density per chassis: These modules support up to 1152 10/100 ports or 576 10/100/1000 ports in the Cisco Catalyst 6513 chassis; up to 768 10/100 ports or 384 10/100/1000 ports in the Cisco Catalyst 6509 chassis; up to 480 10/100 ports or 240 10/100/1000 ports in the Cisco Catalyst 6506 chassis; and up to 192 10/100 ports or 96 10/100/1000 ports in the small-form-factor Cisco Catalyst 6503 chassis.
• Field-installable and -upgradable inline-power daughter cards: These modules help enable centralized power distribution to IP phones, wireless access points, and other devices by sharing the same Category 5 UTP cabling used for network connections.
Note: Some of these modules are designed to support field upgrades to the IEEE 802.3af PoE standard with a new daughter card, providing maximum investment protection. Table 6 for details.
• TDR: TDR is supported in all the 10/100/1000 modules and 10/100 modules (product numbers WS-X6148A-RJ-45 and WS-X6148A-45AF); TDR tests cabling by sending signals down the cable to identify faults in each twisted pair.

Product Number

Primary Application

Ports, Connector, Maximum Distance, and Cable Type

PoE Support

Maximum Frame Size (jumbo frame) Support

Queues per Port (Tx= Transmit, Rx= Receive) 1

Buffer Size per Port

WS-X6148A-GE-TX

Wiring closet

48, RJ-45, 100m, Category 5 cable

Field-upgradable to Cisco Prestandard and IEEE 802.3af

Up to 9216 bytes per frame

Tx-1p3q8t

Rx-1q2t

5.5 MB

WS-6148-GE-TX

Wiring closet

48, RJ-45, 100m, Category 5 cable

Field-upgradable to Cisco Pre standard and IEEE 802.3af

Up to 1518 bytes per frame

Tx-1p2q2t (per 8 ports)

Rx-1p2t (per port)

1.4 MB per 8 ports

WS-X6148A-GE-45AF

Wiring closet

48, RJ-45, 100m, Category 5 cable

Yes (both IEEE 802.3af and Cisco Prestandard)

Up to 9216 bytes per frame

Tx-1p3q8t

Rx-1q2t

5.5 MB

WS-X6148-GE-45AF

Wiring closet

48, RJ-45, 100m, Category 5 cable

Yes (Both both IEEE 802.3af and Cisco Prestandard)

Up to 1518 bytes per frame

Tx-1p2q2t (per 8 ports)

Rx-1p2t (per port)

1.4 MB per 8 ports

WS-X6148V-GE-TX

Wiring closet

48, RJ-45, 100m, Category 5 cable

Yes, only Cisco Prestandard

Up to 1518 bytes per frame

Tx-1p2q2t (per 8 ports)

Rx-1p2t (per port)

1.4 MB per 8 ports

WS-X6348-RJ45

Wiring closet

48, RJ-45, 100m, Category 5 cable

Field-upgradable to only Cisco Prestandard and not IEEE 802.3af

Up to 8092 bytes per frame

Tx-2q2t

Rx-1q4t

128 KB

WS-X6348-RJ45V

Wiring closet

48, RJ-45, 100m, Category 5 cable

Yes, only Cisco Prestandard

Up to 8092 bytes per frame

Tx-2q2t

Rx-1q4t

128 KB

WS-X6348-RJ21V

Wiring closet

48, RJ-21, 100m, Category 5 cable

Yes, only Cisco Prestandard

Up to 8092 bytes per frame

Tx-2q2t

Rx-1q4t

128 KB

WS-X6196-RJ-21

Wiring closet

96, RJ-21, 100m, Category 5 cable

Field-upgradable to Cisco Prestandard and IEEE 802.3af

Up to 9216 bytes per frame

Tx-1p3q1t

Rx-1p1q0t

1116 KB

WS-X6196-21AF

Wiring closet

96, RJ-21, 100m, Category 5 cable

Yes (both IEEE 802.3af and Cisco Prestandard)

Up to 9216 bytes per frame

Tx-1p3q1t

Rx-1p1q0t

1116 KB

WS-X6148X2-RJ-45

Wiring closet

48, scalable to 96, RJ-45, 100m, Category 5 cable

Field-upgradable to Cisco Prestandard and IEEE 802.3af

Up to 9216 bytes per frame

Tx-2q2t

Rx-1q4t

1116 KB

WS-X6148X2-45AF

Wiring closet

48, scalable to 96, RJ-45, 100m, Category 5 cable

Yes (both IEEE 802.3af and Cisco Prestandard)

Up to 9216 bytes per frame

Tx-2q2t

Rx-1q4t

1116 KB

WS-X6148A-RJ-45

Wiring closet

48, RJ-45, 100m, Category 5 cable

Field-upgradable to IEEE 802.3af

Up to 9216 bytes per frame

Tx-1p3q8t

Rx-1p1q4t

5.3 MB

WS-X6148A-45AF

Wiring closet

48, RJ-45, 100m, Category 5 cable

Yes (both IEEE 802.3af and Cisco Prestandard)

Up to 9216 bytes per frame

Tx-1p3q8t

Rx-1p1q4t

5.3 MB

WS-X6148-RJ45

Wiring closet

48, RJ-45, 100m, Category 5 cable

Field-upgradable to only Cisco Prestandard and Advance Replacement for IEEE 802.3af

Up to 8092 bytes per frame

Tx-2q2t

Rx-1q4t

128 KB

WS-X6148-45AF

Wiring closet

48, RJ-45, 100m, Category 5 cable

Yes (both IEEE 802.3af and Cisco Prestandard)

Up to 8092 bytes per frame

Tx-2q2t

Rx-1q4t

128 KB

WS-X6148-RJ45V

Wiring closet

48, RJ-45, 100m, Category 5 cable

Yes, only Cisco Prestandard

Up to 8092 bytes per frame

Tx-2q2t

Rx-1q4t

128 KB

WS-X6148-RJ21

Wiring closet

48, RJ-21, 100m, Category 5 cable

Field-upgradable to only Cisco Prestandard and Advance Replacement for IEEE 802.3af

Up to 8092 bytes per frame

Tx-2q2t

Rx-1q4t

128 KB

WS-X6148-21AF

Wiring closet

48, RJ-21, 100m, Category 5 cable

Yes (both IEEE 802.3af and Cisco Prestandard)

Up to 8092 bytes per frame

Tx-2q2t

Rx-1q4t

128 KB

WS-X6148-RJ21V

Wiring closet

48, RJ-21, 100m, Category 5 cable

Yes, only Cisco Prestandard

Up to 8092 bytes per frame

Tx-2q2t

Rx-1q4t

128 KB

Cisco Catalyst 6500 Series Data-Only Classic Gigabit Ethernet-over-Copper Interface Module
Designed for distribution and core layers and for data-center and Web-hosting applications, the Cisco Catalyst 6500 Series Classic 16-port Gigabit Ethernet interface modules provide line-rate Gigabit Ethernet forwarding with the following operational advantages:
• Forwarding architecture: These modules use centralized Cisco Express Forwarding.
• Forwarding performance: These modules forward packets up to 15 Mpps per system.
• Fabric connection: These modules provide a 32-Gbps shared bus connection.
• Supervisor engine: These modules work with Supervisor Engine 1A, Supervisor Engine 2, Supervisor 32, or Supervisor Engine 720.
• Distributed forwarding upgrade: No upgrade is available; classic interface modules cannot be upgraded for distributed forwarding.
• Slot requirements: There are no slot requirements; the modules can occupy any slot in any Cisco Catalyst 6500 Series chassis.
• Maximum port density per chassis (16-port modules): These modules support up to 192 ports per Cisco Catalyst 6513 and up to 128 ports per Cisco Catalyst 6509.

Product Number

Description

10/100/1000

WS-X6748-GE-TX

Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Cisco Express Forwarding 720 Interface Module; field-upgradable to support distributed forwarding with the addition of the distributed forwarding daughter card (part number WS-F6700-DFC3A=)

WS-X6548-GE-TX

Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Cisco Express Forwarding 256 Interface Module; field-upgradable to support Cisco Prestandard PoE daughter card (part number WS-F6K-VPWR-GE=) or 802.3af PoE daughter card (part number WS-F6K-GE48-AF=)

WS-X6548-GE-45AF

Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Cisco Express Forwarding 256 Interface Module with 802.3af PoE daughter card (that is, includes daughter card [part number WS-F6K-GE48-AF=])

WS-X6548V-GE-TX

Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Cisco Express Forwarding 256 Interface Module with Cisco Prestandard PoE Daughter Card (that is, includes daughter card [part number WS-F6K-VPWR-GE=])

WS-X6516-GE-TX

Cisco Catalyst 6500 Series 16-Port 10/100/1000 RJ-45 Cisco Express Forwarding 256 Interface Module; field-upgradable to support distributed forwarding with the addition of the distributed forwarding daughter card (part number WS-F6K-DFC= or DFC3)

WS-X6148A-GE-TX

Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Classic Interface Module; field-upgradable to support 802.3af PoE daughter card (part number WS-F6K-GE48-AF=)

WS-X6148-GE-TX

Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Classic Interface Module; field-upgradable to support Cisco Prestandard PoE Daughter Card (part number WS-F6K-VPWR-GE=) or 802.3af PoE daughter card (part number WS-F6K-GE48-AF=)

WS-X6148A-GE-45AF

Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Classic Interface Module with 802.3af PoE daughter card (that is, includes daughter card (part number WS-F6K-GE48-AF=)

WS-X6148-GE-45AF

Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Classic Interface Module with 802.3af PoE daughter card (that is, includes daughter card (part number WS-F6K-GE48-AF=)

WS-X6148V-GE-TX

Cisco Catalyst 6500 Series 48-Port 10/100/1000 RJ-45 Classic Interface Module with Cisco Prestandard PoE Daughter Card (that is, includes daughter card (part number WS-F6K-VPWR-GE=)

10/100

WS-X6548-RJ-45

Cisco Catalyst 6500 Series 48-Port Cisco Express Forwarding 256 10/100 RJ-45 Interface Module; field-upgradable to support distributed forwarding with the addition of the distributed forwarding daughter card (part number WS-F6K-DFC= or DFC3)

WS-X6548-RJ-21

Cisco Catalyst 6500 Series 48-Port, Cisco Express Forwarding 256 10/100 RJ-21 Interface Module; field-upgradable to support distributed forwarding with the addition of the distributed forwarding daughter card (part number WS-F6K-DFC= or DFC3)

WS-X6348-RJ45

Cisco Catalyst 6500 Series 48-Port 10/100 RJ-45 Classic Interface Module; field-upgradable to support Cisco Prestandard PoE Daughter Card (part number WS-F6K-VPWR=)

WS-X6348-RJ45V

Cisco Catalyst 6500 Series 48-Port 10/100 RJ-45 Classic Interface Module with Cisco Prestandard PoE Daughter Card (that is, includes daughter card [part number WS-F6K-VPWR=])

WS-X6348-RJ21V

Cisco Catalyst 6500 Series 48-Port 10/100 RJ-21 Classic Interface Module with Cisco Prestandard PoE Daughter Card (that is, includes daughter card [part number WS-F6K-VPWR=])

WS-X6148X2-RJ-45

Cisco Catalyst 6500 Series 96-Port 10/100 RJ-45 Classic Interface Module; field-upgradable to support 802.3af PoE daughter card (part number WS-F6K-FE48X2-AF=)

WS-X6148X2-45AF

Cisco Catalyst 6500 Series 96-Port 10/100 RJ-45 Classic Interface Module with 802.3af PoE daughter card (that is, includes daughter card [part number WS-F6K-FE48X2-AF=])

WS-X6196-RJ-21

Cisco Catalyst 6500 Series 48-Port 10/100 RJ-21 Classic Interface Module; field-upgradable to support 802.3af PoE daughter card (part number WS-F6K-FE48X2-AF=)

WS-X6196-21AF

Cisco Catalyst 6500 Series 96-Port 10/100 RJ-21Classic Interface Module with 802.3af PoE daughter card (that is, includes daughter card [part number WS-F6K-FE48X2-AF=])

WS-X6148A-RJ-45

Cisco Catalyst 6500 Series 48-Port 10/100 RJ-45 Classic Interface Module; field-upgradable to support 802.3af PoE daughter card (part number WS-F6K-GE48-AF=)

WS-X6148-RJ-45

Cisco Catalyst 6500 Series 48-Port 10/100 RJ-45 Classic Interface Module; upgradable to support Cisco Prestandard PoE Daughter Card (part number WS-F6K-VPWR=) or to IEEE 802.3af PoE daughter card (part number WS-X6148-45AF-UG=)

WS-X6148A-45AF

Cisco Catalyst 6500 Series 48-Port 10/100 RJ-45 Classic Interface Module with IEEE 802.3af PoE daughter card

WS-X6148-45AF

Cisco Catalyst 6500 Series 48-Port 10/100 RJ-45 Classic Interface Module with IEEE 802.3af PoE daughter card

WS-X6148-RJ45V

Cisco Catalyst 6500 Series 48-Port 10/100 RJ-45 Classic Interface Module with Cisco Prestandard PoE Daughter Card (that is, includes daughter card [part number WS-F6K-VPWR=])

WS-X6148-RJ-21

Cisco Catalyst 6500 Series 48-Port 10/100 RJ-21 Classic Interface Module; upgradable to support Cisco Prestandard PoE Daughter Card (part number WS-F6K-VPWR=) or to IEEE 802.3af PoE daughter card (part number WS-X6148-21AF-UG=)

WS-X6148-21AF

Cisco Catalyst 6500 Series 48-Port 10/100 RJ-21 Classic Interface Module with IEEE 802.3af PoE daughter card

WS-X6148-RJ21V

Cisco Catalyst 6500 Series 48-Port 10/100 RJ-21 Classic Interface Module with Cisco Prestandard PoE Daughter Card (that is, includes daughter card [part number WS-F6K-VPWR=])

Part Number

Description

WS-F6K-GE48-AF=

Cisco Catalyst 6500 Series 802.3af PoE Daughter Card for 10/100/1000 modules (part numbers WS-X6148-GE-TX, WS-X6148V-GE-TX, WS-X6548-GE-TX, and WS-X6548V-GE-TX)

WS-F6K-FE48X2-AF=

Cisco Catalyst 6500 Series 802.3af PoE Daughter Card for WS-X6148X2-RJ-45) module

WS-X6148-45AF-UG=

Cisco Catalyst 6500 Series 802.3af PoE Advanced Upgrade for (part number WS-X6148-RJ45 or WS-X6148-RJ45V)

WS-X6148-21AF-UG=

Cisco Catalyst 6500 Series 802.3af PoE Advanced Upgrade for (part number WS-X6148-RJ21 or WS-X6148-RJ21V)

WS-F6K-VPWR=

Cisco Catalyst 6500 Series Cisco Prestandard PoE Daughter Card for 10/100 modules (for WS-X6148-RJxx and WS-X6348-xx)

WS-F6K-VPWR-GE=

Cisco Catalyst 6500 Series Cisco Prestandard PoE Daughter Card for 10/100/1000 modules (part numbers WS-X6148-GE-TX and WS-X6548-GE-TX)

Part Number

Description

WS-F6K-DFC

Cisco Catalyst 6500 Series DFC3A for Cisco Catalyst 6500 Series; Cisco Catalyst 6816 modules used with Supervisor Engine 2

WS-F6K-DFC3A

Cisco Catalyst 6500 Series DFC3A for Cisco Catalyst 6500; Cisco Catalyst 6816 modules used with Supervisor Engine 720

WS-F6K-DFC3B

Cisco Catalyst 6500 Series DFC3B for Cisco Catalyst 6500; Cisco Catalyst 6816 modules used with Supervisor Engine 720

WS-F6K-DFC3BXL

Cisco Catalyst 6500 Series DFC3BXL for Cisco Catalyst 6500; Cisco Catalyst 6816 modules used with Supervisor Engine 720

MEM-DFC-256MB

256 MB DRAM option for DFC

MEM-DFC-512MB

512 MB DRAM option for DFC

WS-F6700-DFC3A

Cisco Catalyst 6500 Series DFC3A for Cisco Catalyst 6700 Series modules

WS-F6700-DFC3B

Cisco Catalyst 6500 Series DFC3B for Cisco Catalyst 6700 Series modules

WS-F6700-DFC3BXL

Cisco Catalyst 6500 Series DFC3BXL for Cisco Catalyst 6700 Series modules

Även om vi gör vårt bästa för att ge relevant information, så är bilderna bara till för att ge ett generellt intryck, och själva varan behöver nödvändigtvis inte se ut precis som på bilden. Om det är skillnader mellan produktöverskrift, beskrivning och bild, så är det produktöverskriften som gäller. (tex. Pc:n kommer inte nödvändigtvis med monitor även om bilden visar det) Om något är oklart skicka en e-post till oss före du beställer! Vi förbehåller oss för tryckfel, ändringar av priser och specifikationer utan varsel.

Online meddelande

Kundvagnen

Töm kundvagnen

Logga in

  
 
 Kom ihåg mig
Logga in
Glömt lösenord?
Ny kund?

ACE Bundlingar

Konfiguratorer

Nyhetsbrev

Prenumerera på kampanjerbjudande och nyheter per e-post.

   

 

ACE Options   |   Optimusvägen 12C   |   194 34 Upplands Väsby   |   Phone: +46 (0)8 446 37 20   |   Fax: +46 (0)8 446 37 21   |   E-mail: info@aceoptions.se Kategorier
Tillverkare