+46 8 446 37 20info@aceoptions.se

Hem      |     Logistik      |     Köpvillkor      |     Retur & Garanti      |     Garanterat ACE      |     Support      |     Tjänster      |     Kontakt
Sök
 
 

Catalyst 6500

Du måste logga in för att kunna handla/se priser.
Catalyst 6500 3000w ac power supply

CISCO Catalyst 6500 3000w ac power supply (WS-CDC-2500W=)


SKU: WS-CDC-2500W=
Org. Artikel#: WS-CDC-2500W=
Produkt: Tillbehör
Portar: 0
Hastighet: 0Mbps
Inte på lager
HYRA (ex moms)
12-mån 
2.064,-/månader
24-mån 
1.059,-/månader
36-mån 
726,-/månader
Vid HYRA gäller. Uppläggningsavgift 350,- , administrationsavgift 0,-/månad, minsta order 5.000,- Moms tillkommer. Förutsätter kreditgodkänning. Hyra kan väljas som ett betalningssätt när du kommer till kassan.
Beskrivning

2500 W AC-Input and DC-Input Power Supplies

The 2500 W AC-input power supply (WS-CAC-2500W) and 2500 W DC-input power supply (WS-CDC-2500W) are supported in the following Catalyst 6500 series switches:
•Catalyst 6506
•Catalyst 6506-E
•Catalyst 6509
•Catalyst 6509-E
•Catalyst 6509-NEB
•Catalyst 6509-NEB-A
•Catalyst 6509-V-E
•Catalyst 6513
•Catalyst 6513-E (DC-input power supply only)

With a fully populated Catalyst 6513 switch, two 2500 W power supplies are not fully redundant. If you operate the 2500 W power supply at the low range input (100 to 120 VAC), it is not redundant in a fully populated Catalyst 6509, Catalyst 6509-E, Catalyst 6509-NEB, Catalyst 6509-NEB-A, or Catalyst 6509-V-E switch.

The 2500 W AC-input power supply needs 220 VAC to deliver 2500 W of power. When powered with 110 VAC, it delivers only 1300 W. In addition, the power supply needs 16 A, regardless of whether it is plugged into 110 VAC or 220 VAC.

2500 W AC-Input Power Supply Specifications 

Specification
Description

AC-input type

Autoranging input with power factor correction (PFC).

Note Power factor correction is a standard feature on all Catalyst 6500 series AC-input power supplies. PFC reduces the reactive component in the source AC current allowing higher power factors (typically 99 percent or better) and lower harmonic current components.

AC-input voltage

•Low-line (120 VAC nominal)—90 VAC (min) to 132 VAC (max)

•High-line (230 VAC nominal)—170 VAC (min) to 264 VAC (max)

AC-input current

16 A maximum at 230 VAC at 2500 W output
16 A maximum at 120 VAC at 1300 W output

AC-input frequency

50/60 Hz (nominal) (±3% for full range)

Branch circuit requirement

Each chassis power supply should have its own dedicated, fused-branch circuit:

•For North America—20 A

•For International—Circuits sized to local and national codes

•All AC power supply inputs are fully isolated.

–Source AC can be out of phase between multiple power supplies in the same chassis, which means that PS1 can be operating from phase A and PS2 can be operating from phase B.

–For high-line operation, the power supply operates with the hot conductor wired to a source AC phase and the neutral conductor wired either to ground or to another source AC phase as long as the net input voltage is in the range of 170 to 264 VAC.

–Source AC can be out of phase between AC inputs on power supplies that are equipped with multiple AC inputs, which means that power cord 1 can be plugged into phase A and power cord 2 can be plugged into phase B.

Power supply output capacity

•1300 W maximum (100-120 VAC)

•2500 W maximum (200-240 VAC)

Power supply output

•100/120 VAC operation

–15.5 A @ +3.3 VDC

–5 A @ +5 VDC

–10 A @ +12 VDC

–27.5 A @ +42 VDC

•200/240 VAC operation

–15 A @ +3.3 VDC

–5 A @ +5 VDC

–10 A @ +12 VDC

–55.5 A @ +42 VDC

Output holdup time

20 ms minimum

kVA rating 1

3520 W (total input power) or 3.6 KVA (high-line operation)

Heat dissipation

10,939 BTU/hour (approx.)

Weight

17.0 lb (7.7 kg)

1 The kVA rating listed for the power supply should be used as the sizing criteria for both UPS outputs as well as standard circuits and transformers to power a switch.

2500 W DC-Input Power Supply Specifications 

Specification
Description

DC-input voltage

-48 VDC to -60 VDC continuous

DC-input current

•80 A @ -40.5 VDC

•70 A @ -48 VDC

•55 A @ -60 VDC

Power supply output capacity

2500 W maximum (-48 to -60 VDC)

Power supply output

•15 A @ +3.3 VDC

•5 A @ +5 VDC

•10 A @ +12 VDC

•55.5 A @ +42 VDC

DC input terminal block

Accepts 2-14 AWG copper conductors. Actual size of the wire needed is determined by the installer or local electrician. Terminal block material rated at 150°C.

Output holdup time

•20 ms minimum (AC-input power supply)

•4 ms (DC-input power supply)

Heat dissipation

•10,939 BTU/hour (approx.) AC-input power supply

•11,377 BTU/hour (approx.) DC-input power supply

Weight

20.2 lb (9.2 kg)

Även om vi gör vårt bästa för att ge relevant information, så är bilderna bara till för att ge ett generellt intryck, och själva varan behöver nödvändigtvis inte se ut precis som på bilden. Om det är skillnader mellan produktöverskrift, beskrivning och bild, så är det produktöverskriften som gäller. (tex. Pc:n kommer inte nödvändigtvis med monitor även om bilden visar det) Om något är oklart skicka en e-post till oss före du beställer! Vi förbehåller oss för tryckfel, ändringar av priser och specifikationer utan varsel.

Online meddelande

Kundvagnen

Töm kundvagnen

Logga in

  
 
 Kom ihåg mig
Logga in
Glömt lösenord?
Ny kund?

ACE Bundlingar

Konfiguratorer

Nyhetsbrev

Prenumerera på kampanjerbjudande och nyheter per e-post.

   

 

ACE Options   |   Optimusvägen 12C   |   194 34 Upplands Väsby   |   Phone: +46 (0)8 446 37 20   |   Fax: +46 (0)8 446 37 21   |   E-mail: info@aceoptions.se Kategorier
Tillverkare